Filter
Top Products
Print Server Installation AXIS 1650 User’s Manual
16
Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003
1. Open a Command Prompt and type:
Example:
2. If the host returns
Reply from 192.168.3.191 ... or a similar message, the IP address
has been set successfully.
If the host returns Request time out... you need to reboot the print server and perform
steps 1-2 above again. Rebooting the print server is done by disconnecting and then
re-connecting the print server’s power supply.
3. Access the print server’s Web pages ( - See page 37), select Admin | Network Settings |
Detailed View | TCP/IP and define the Default Router and Subnet Mask. Make sure DHCP,
BOOTP and RARP are disabled
.
You have now set the IP address of the print server. Continue with Windows Installation, on
page 22.
Note:
arp -s <IP address> <Ethernet address>
ping -l 479 <IP address>
arp -s 192.168.3.191 00-40-8c-18-1c-f0
ping -l 479 192.168.3.191
When you execute the ping command for the first time, you will experience a significantly
longer response time than usual.