Filter
Top Products
28
Confirm that a checkmark appears next to the selected device, then d
click Exit.
Congratulations! You are nished with the setup.
Go to "Start Using Your MX860!" on page 37.
Wired Networks
wired network connecting
with an Ethernet cable
wireless network with
multiple access points
(example: Airport Extreme and Airport Express)
wireless network with
a single access point
Wi-Fi router
Wi-Fi
router
Wi-Fi router
router
If you will be connecting your MX860 to a wired LAN (Local Area
Network) using an Ethernet cable, follow the steps below.
Make sure the MX860 is ready1
Ensure the MX860 is connected to your computer
with the USB cable and is powered on
You will need the USB cable only for the initial network
setup. Once your MX860 is connected to your network, the USB
cable is no longer needed.
Set the Network Connection Type2
The MX860 is set at the factory to connect to a wireless (Wi-Fi) network.
To connect to a wired network using an Ethernet cable, change the
network connection type from the MX860 panel.
On the MX860, press the
a Menu button.
Use the
b ◄ or ► button to select Settings, then press the OK button.
Select
c Device Settings, then press the OK button.