Filter
Top Products
30
Connect the Ethernet cable5
Remove the LAN connector cap from the back of the MX860 (located a
just above the USB connection).
Connect the MX860 to your network with an Ethernet cable (not b
included).
Do not attempt to connect the supplied phone cord to
the LAN port. Do not confuse the LAN port
with the telephone
jacks
.
Click 6 Yes to close the Check Wired LAN Connection reminder
If the MX860 is not detected automatically, the Set Printer
IP Address dialog appears.
The TCP/IP Setting of Get IP address automatically is correct for
most networks. If your network uses pre-assigned IP addresses
(also called xed or static addresses), select Use following IP
address in the pop-up menu and enter the appropriate information,
then click Connect.