Filter
Top Products
3
If no abnormality is found during the self-diagnostic test, the indicator,
indicator and Paper Source indicator for the currently selected paper source
come on, <
>, <00 LIPS>, or <00 ESC/P> appears in the
display, and the printer is ready to print.
The following information is displayed in the display.
Turning the Printer OFF
Turn the printer OFF using the following procedure.
IMPORTANT
•
If the printer is used on a network, make sure that it is not printing data from another
computer before turning the power OFF.
•
If you turn the printer OFF when the
indicator is on, all the print data remaining in
the printer memory will be erased. If there is any necessary print data remaining in the
printer, wait until it is output, or press [
] in the offline state and then select <
> to output the data before turning the printer OFF.
•
Do not turn the power OFF when the printer is in any of the following status:
-While the printer is in the middle of printing
-While the printer is running a self-diagnostic test immediately after turning the power
ON
-While a message informing you that the NVRAM is being initialized or being written is
displayed
-While <
> is displayed
Paper Source Indicators
Indicator
Indicator
Printable and not
processing print data
Size of paper in the currently
selected paper source