Filter
Top Products
9-3
9
SOLUTIONS TO COMMON PROBLEMS
Periodic cleaning
Your fax requires little periodic maintenance. This section describes the necessary cleaning procedures for
the fax. Please note the following before cleaning:
• Be sure to disconnect the power cord before cleaning the fax. Since documents in memory are erased when
the power is disconnected, print any documents stored in memory before disconnecting the power cord
(see p. 5-14).
• Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to the components
or generate static charges.
Cleaning the exterior of the fax________________
Cleaning the interior of the fax ________________
K
Cleaning inside the printer cover
To prevent ink spots and paper dust from accumulating inside the fax and affecting print quality, clean the
print area of the fax periodically.
Caution
Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean
the interior of the fax.
1
Disconnect the power cord from the fax.
2
Wipe the exterior of the fax with a clean,
soft, lint-free cloth moistened with water
or diluted dishwashing detergent solution.
3
When you are finished, reconnect the
power cord.
1
Disconnect the power cord from the fax.
2
Open the printer cover.
3
Use a clean, soft, dry, lint-free cloth to remove any ink or paper debris from the interior of
the fax (shaded area), especially around the four pinch rollers.
Dirt and dust particles that collect on the underside of the printer cover affect the quality of the
documents you copy or send.
Be careful not to touch the BJ cartridge or its holder.
Caution
Do not touch the components or any
metal parts.
Pinch rollers