Filter
Top Products
5-7
Automatic dialling
5
SENDING DOCUMENTS
Sending a document using UCanTalk
(FAX-B140 only) ___________________________
To use this feature you must first register the voice tags for UCanTalk (see p. 2-13).
1
Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and the contrast (see
p. 5-1).
2
Press [UCanTalk]. Then speak the voice tag into
the microphone.
The registered name will be displayed on the LCD.
3
With the party’s name you wish to dial displayed,
press [Start/Copy] to start the document
transmission.
• If the AUTO VOICE DIAL setting is set to ON, the fax
automatically starts the document transmission (see p. 8-2).
• If the displayed party’s name is not what you are searching
for, press [Stop] to cancel the procedure, and re-start from
step 2.
• If an error occurs every time you speak into the microphone,
re-register the voice tag and try again (see pp. 2-10 to 2-13).