Filter
Top Products
28
Control Panel Parts and Functions
Quick Menu key
Press to display registered functions.
Numeric keys
Press to enter numerical values.
Touch Panel Display
Main Menu key
USB Port
Use to connect memory media to the machine via USB.
Settings/Registration key
Press to specify settings/registration.
5
4
3
2
1
7
6
Counter Check key
Volume Settings Key
Status Monitor/Cancel key
Brightness Adjustment Dial
15
14 13
12
11
10
9
20
19
18
17
16
8
Edit Pen
Start key
Press to start an operation.
Stop key
Press to stop a job in progress.
Main Power Indicator
Lights when the main power is turned ON.
Error Indicator
Flashes or lights if there is an error in the machine.
9
10
11
12
13
Processing/Data Indicator
ID (Log In/Out) key
Press to log in/out when a login service is set.
Reset key
Press to restore the standard settings of the machine.
Clear key
Press to clear entered values or characters.
14
15
16
17
The settings screen for each function is shown on this display.
You can operate the machine by touching the screen.
Six function keys are displayed by default.
Press to set or cancel the Sleep mode.
For information on the Auto Sleep mode, see "Control Panel
Power Switch."
Press to display the copy and print count totals on the
touch panel display.
Use to adjust the brightness of the touch panel
display.
Flashes or blinks green when the machine is performing operations,
and maintains a steady green light when fax data is stored in memory.
Press to check the status of jobs or to cancel print jobs. Also,
press to check status of the machine, such as checking the
amount of paper remaining.
Press to display the screen for adjusting settings such as the transmission
volume and fax sending/receiving alarm volume.
Use when operating the touch panel display.
If you lose the edit pen, contact your local authorized Canon dealer. Do
not use an object with a sharp end on the control panel, such as a pencil
or ballpoint pen, in place of the edit pen.
Control Panel Power Switch
(Sub Power Supply)
Press to return to the Main Menu screen such as when
you want to switch functions.