Filter
Top Products
Remove the shipping materials from the machine.
1 Place the machine on a flat surface.
2 Remove all shipping tapes from the exterior of the machine.
3 Gently open the operation panel ➊ (it only opens partially) and remove the protective
sheet
➋ from the ADF.
4 Close the operation panel by pressing at the center until it locks into place.
Assemble the machine.
USB label
NOTE
•Do not remove the USB label on the back of the machine at this stage.
Multi-purpose tray
Support tray
Document
support
Paper loading
warning label
Multi-purpose
tray cover
1 Attach the paper
loading warning
label.
5 Insert the document
support into the slots
on the machine.
2 Insert the multi-purpose tray
into the slots on the machine.
3 Insert one of the
support trays into
the slots above the
delivery slot.
4 Insert the other
support tray into
the slots above the
ADF.
NOTE
•Place the multi-purpose tray cover on the machine after loading paper (see the next page).