Filter
Top Products
Load paper.
1 Insert a stack of paper into the multi-purpose tray ➊ (print side facing you and top
edge first), then adjust the paper width guides to the width of the paper
➋.
2 Attach the multi-purpose tray cover to prevent dust accumulating inside the machine.
Attach the handset cradle to the machine.
1 Insert the plugs with pins into the holes on the handset cradle.
2 Turn the machine so that the left side is facing you.
3 Insert the plugs (with the handset cradle) into the holes on the machine.
4 Carefully push the pins into the plugs as far as they will go.
Paper width guide
Multi-purpose
tray cover
Plug with pin
NOTE
•If the pins are not pushed fully into the plugs,the handset cradle will not be securely attached to the
machine.
NOTE
•Do not push the pins all the way into the plugs at this stage.