Filter
Top Products
An Error Message is Displayed on the Screen
159
Troubleshooting
Error Writing to USBxxx
■ Ensure the printer is turned on.
The cartridge holder will not move unless the power is on. Check to see if the printer is
plugged into the power outlet securely. If not, close the front cover, and then plug the
printer to the power outlet.
■ Ensure the printer is securely connected to the computer.
Note
➤
If you are using a switch box or other devices, remove and reconnect the
printer directly to the computer and try printing again.
If printing is now successful, there may be a problem with the device.
Also there could be a problem with the cable(s). Replace the cable(s) and
try printing again.
■ If spooling is enabled, disable it to send the print data directly to the printer and try
printing again.
1 Open the Printer Properties dialog box.
➡
Opening the Printer Properties Dialog Box
2 On the Details tab, click Spool Settings and then select Print directly to
the printer.
Windows
S200.book Page 159 Saturday, September 22, 2001 2:34 PM