Filter
Top Products
Installing the Scanner 15
Installing the Scanner
Installation Requirements
In order to use the DR-3080CII, your computer must satisfy the following
system requirements:
● IBM PC/AT-compatible that satisfies the following specifications:
•Intel Celeron 733 MHz or faster
• Main memory: 256 MB or more (recommended)
• Hard disc space: 400 MB or more
● SCSI board or USB 2.0 interface board that supports the scanner (See
“Interface Board” on p.18)
● Display that is capable of resolution of 1024 x 768 (XGA) or better
(recommended)
● One of the following operating systems, running normally:
Connecting via SCSI
•Microsoft Windows 98 SE
•Microsoft Windows Me
•Microsoft Windows NT 4.0 Workstation
•Microsoft Windows 2000 Professional SP4
•Microsoft Windows XP Professional SP1
Connecting via USB 2.0
•Microsoft Windows 98 SE
•Microsoft Windows Me
•Microsoft Windows 2000 Professional SP4
•Microsoft Windows XP Professional SP1
● ISIS-compatible or TWAIN-compatible application software that runs
normally on your operating system
IMPORTANT
● If you are connecting the scanner via USB 2.0 interface, be sure to use an
updated version of the USB 2.0 driver. For details on the updated driver,
contact your local authorized Canon dealer.
● If your CPU, memory or SCSI board does not meet the recommended
specifications, you may experience problems such as a slower scanning
speed.
Note
● Be sure to allocate sufficient virtual memory.
● Use a SCSI board recommended for use with the scanner.