Filter
Top Products
Before Using the Scanner 7
EnglishFrançaisDeutschEspañolItaliano
Nederlands
The following conditions are recommended for optimal scanning quality:
Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% RH
• Avoid installing the scanner near equipment that generates a magnetic field
(e.g. speakers, televisions, or radios).
Power
• Connect only to a power outlet of the rated voltage and power supply
frequency. (either 120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your
region)
• Do not use a power supply that is not rated for the specified voltage. Doing
so might cause fire or electric shock.
• Do not connect other electrical equipment to the same power outlet to which
the scanner is connected. Also, when using an extension cord, make sure that
the extension cord is rated for the current requirements of the scanner.
• The power cord may become damaged if they are often stepped on or if
heavy objects are placed on them. Continued use of a damaged power cord
can lead to an accident, such as a fire or electrical shock.
• Do not use the power cord while it is coiled.
• Do not pull directly on the power cord. When disconnecting the power cord,
grasp the plug and remove it from the outlet.
• Keep the area around the power plug clear of objects so that the power cord
can be disconnected easily in an emergency.
• If you have any questions regarding the power supply, contact your local
authorized Canon dealer or service representative for further information.
Moving the Scanner
• When moving the scanner, always hold it with both hands to avoid dropping
it. The scanner weighs approximately 23 lb (10.2 kg) alone.
• Make sure to disconnect the interface cable and power cord. If the scanner is
transported with these items plugged in, the plugs and connectors may be
damaged due to physical shock.