Filter
Top Products
14
STEP 3 Connecting to a Computer
Connect the scanner to the computer and the power supply.
IMPORTANT
•Do not connect the scanner to the computer before installing the
software.
•Before connecting the scanner to the computer, verify that the
power of the scanner is OFF. If the power is ON, turn it OFF.
Hint
You can secure the cables to the back of the scanner. Make sure
there is sufficient slack in the cable when doing so to reduce stress
on the connector.
To the power outlet
AC adapter (included
with the scanner)
USB cable (included
with the scanner)
To computer
USB port
0-00-DR-C125_RG_UK.book Page 14 Thursday, September 8, 2011 6:03 PM