Filter
Top Products
55
4
Slide the roller to the right to secure it.
5
Close the roller cover. Make sure that it is completely
closed by pressing until you hear a click.
Replacing the Retard Roller
1
Open the roller cover.
2
Remove the retard roller and then install the new retard
roller. When installing the retard roller, align the notch on
the roller with the shaft of the main unit.
3
Close the roller cover. Make sure that it is completely
closed by pressing until you hear a click.
0-00-DR-C125_RG_UK.book Page 55 Thursday, September 8, 2011 6:03 PM