Filter
Top Products
62
Nothing displays when the CD-ROM is placed in the drive
Cause : CD-ROM will not automatically run the menu program
Solution: Start the menu program manually (See p. 29)
Installation just doesn’t seem to be working
Solution: Manually install the software by clicking the [Start] button, selecting
[Run] and typing one of the command lines below into the box. If
your CD-ROM drive is labeled other than [D:], substitute the
appropriate letter, such as [E:] or [F:], in the lines below
To install CanoCraft CS-P: [D:\CANOCRFT\ENGLISH\DISK1\SETUP.EXE]
To install ScanGear Toolbox CS:
[D:\TOOLBOX\ENGLISH\DISK1\SETUP.EXE]
To install Ulead Photo Express 2.0 SE: [D:\PHOTOEX\SETUP.EXE]
To install Caere OmniPage Limited Edition:
[D:\OPLE\DISK1\SETUP.EXE]
To install
Adobe Acrobat Reader:
[D:\ACROREAD\ENGLISH\AR32E301
.EXE
]
To read the electronic manuals on the CD-ROM, navigate to the
[D:\MANUAL] folder and open the PDF files in the respective
subfolders
Problems Starting Software Programs
[No Scanners detected. Please check if CanoScan FB330P/FB630P is
connected properly.] message displays
Cause 1: Scanner not detected because the AC adapter is not correctly
plugged into the electrical outlet
Solution: Plug the AC adapter securely into the electrical outlet (See p. 26)