Filter
Top Products
1 - 39
3-5-5 Explanation of service data
a) SSSW (Service Soft Switch settings)
The items registered and set by each of these switches comprise 8-bit switches. The figure below shows
which numbers are assigned to which bits. Each bit has a value of either 0 or 1.
Figure 1-30
Bit Switch Display
See the chart in the service data shown in this Chapter, 5.2.3 Service data setting to see effective
bits and their default values. The meanings (functions) of the bits are not described in this manual
except the new switches added to this model. See the G3 Facsimile Service Data Handbook
(supplied separately) for details of the switches.
Below are examples showing how to read bit switch tables.
Figure 1-31 How to Read Bit Switch Tables
SW01
00000000
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
Service error code
Error dump list
Not used
Not used
##300 series service error code
Not used
Not used
Not used
Output
Output
Output
Function
0
1
2
3
4
5
6
7
Bit 1 0
Indicates that the
setting is "1".
Figures in boldface
are default settings.
Indicates that the
setting is "0".
Not Output
Not Output
Not Output