Filter
Top Products
Printing Problems
3-6
3
Troubleshooting
The printing location has slipped.
Cause 1 Margin, Offset X, or Offset Y in the printer settings menu have been changed.
Remedy Set Margin, Offset X, and Offset Y to '0.0' and print the data again. (See "Margin," on p. 2-10,
and "Offset X/Offset Y," on p. 2-12.)
Cause 2 The application software' s top margin and paper location settings are not correct.
Remedy Set the correct settings for the top margin and the paper location and print the data again.
(See the application software manual.)
Data that should be printed on the same page is printed on two separate pages.
Cause The application software's "Line spacing" and "Number of lines on a page" settings are not
correct.
Remedy Change the settings so that the data fits on one page and print the data again. (See the
application software manual.)