Canon iR4570 Printer User Manual


 
Settings Menu
2-19
2
Printer Settings Menu
Punch
Off
*
, Top, Bottom, Left, and Right
This setting enables you to specify the desired paper position for two holes to be punched for
binding.
NOTE
This function is available for selection in combination with the following optional units.
- If the Finisher-S1 is attached to the Puncher Unit-Q1.
- If the Finisher-Q3 or Saddle Finisher-Q4 is attached to the Puncher Unit-L1.
Acceptable paper sizes for this option are A3, JIS-B4, A4, A4R, JIS-B5, JIS-B5R, 11" x 17", LGL,
LTR, LTRR, and EXEC.
Make sure to select compatible settings when using Staple+Collate and Punch simultaneously. If
conflicting settings are selected, such as the staple setting for the right side of the paper and the
punch setting for the left, the printer will use neither Staple+Collate nor Punch.
Holes cannot be punched in Heavy Paper, Transparency, Tracing paper, and Labels.