Filter
Top Products
7
C. TO PROGRAM GROUP DIAL
1. Press Function
2. Press Data Registration
3. Press to display “TEL REGISTRATION”
4. Press OK
5. Press until display shows “GROUP DIAL”
6. Press OK
7. To register a group dialer :
Under a one-touch button, press or to select available button or
under a coded speed dial button, press Coded Dial
, then 2-digit No.
8. Press OK twice
9. ** To assign destinations to the group :
Press the desired one-touch buttons &/or Coded Speed Dial using
“Coded Dial
, then the 2-digit code” repeatedly
10. Press OK twice
11. Enter name for the above group dialer (refer to A.9. on III : TO
STORE FAX NUMBERS)
12. Press OK
13. To continue, press Function, then Data Registration
14. Repeat steps No. 7 to No. 12
15. To end, press Stop
** You cannot enter fax numbers not already registered for
one-touch or coded speed dialling