Filter
Top Products
9
V SENDING TO MORE THAN ONE LOCATION
(SEQUENTIAL BROADCASTING)
USING ONE-TOUCH / CODED SPEED DIAL
1. Place documents face down on the Feeder
2. Press all the relevant one-touch / coded speed dialling numbers one
right after another
3. Press Start/Copy
4. Take note of “ TX / RX ” number
N.B. Please check on the MULTI TRANSACTION REPORT ** which
will be generated out after the broadcast is completed to ensure that
the broadcast is successful.
** To ensure that this report is churned out after the successful broadcast,
the TX Report must be set to “OUTPUT YES” status. Please refer to :
XI TRANSMISSION REPORT setting