Canon LV-5110 Projector User Manual


 
9
PREPARATION
POSITIONING THE PROJECTOR
This projector is designed to project on a flat
projection surface.
The projector can be focused from 4.6(1.4m) ~
26.3(8.0m).
Refer to the figure below to adjust the screen size.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by
rotating the ADJUSTABLE FEET. Projection angle can
be adjusted to 7.6 degrees.
Lift the front of the projector and pull the FEET LOCK
LATCHES on both sides of the projector.
1
ADJUSTABLE FEET
FEET LOCK
LATCHES
H1
H2
200
167
150
125
100
83
60
50
36
26.3 (8.0m)
19.7 (6.0m)
13.1 (4.0m)
7.8 (2.4m)
4.6 (1.4m)
30
Release the FEET LOCK LATCHES to lock the
ADJUSTABLE FEET and rotate the ADJUSTABLE FEET
to fine tune the position and the tilt.
2
To shorten the ADJUSTABLE FEET, lift the front of the
projector and pull and undo the FEET LOCK LATCHES.
The position and the keystone distortion of the image can
be adjusted using the Menu Operation. (Refer to P 20,
28 and 30.)
3
ROOM LIGHT
The brightness in the room has a great
influence on the picture quality. It is
recommended to limit ambient lighting in
order to provide the best image.
Max. Zoom
Min. Zoom
Screen Size
(W x H) mm
Height (H1)
30
Height (H2)
610 x 457
16.61(422mm)
1.38(35mm)
60
1219 x 914
33.2(844mm)
2.8(70mm)
100
2032 x 1524
55.4(1407mm)
4.6(117mm)
150
3048 x 2286
83.1(2110mm)
6.9(176mm)
200
4064 x 3048
110.8(2814mm)
9.2(234mm)