Canon LV-7355 LV-7350 Projector User Manual


 
9
PREPARATION
POSITIONING PROJECTOR
This projector is designed to project on a flat projection surface.
The projector can be focused from 3.6 (1.1m) ~ 27.6(8.4m).
Refer to the figure below to adjust a screen size.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by rotating
Adjustable Feet. Projection angle can be adjusted to about 16
degrees.
Lift the front of a projector and pull Feet Lock Latches on
both sides of the projector.
1
ADJUSTABLE FEET
FEET LOCK
LATCHES
41”
100”
150”
200”
300”
200”
133”
100”
67”
28”
27.6 (8.4m)
18.4 (5.6m)
13.8 (4.2m)
9.2 (2.8m)
3.6 (1.1m)
Release Feet Lock Latches to lock Adjustable Feet and
rotate Adjustable Feet to fine tune position and tilt.
2
To retract Adjustable Feet, lift the front of the projector and
pull and undo Feet Lock Latches.
Keystone distortion of a projected image can be adjusted by
Menu Operation. (Refer to P20 and 35.)
3
ROOM LIGHT
The brightness in a room has a great influence on
picture quality. It is recommended to limit
ambient lighting in order to provide the best
image.
Max. Zoom
Min. Zoom
CAUTION
Avoid positioning a projector with the angle of more than 20
degrees. Projection Lamp may malfunction.
Screen Size
(W x H) mm
Zoom (min)
41
Zoom (max)
833 x 624
5.6' (1.7m)
3.6' (1.1m)
100
2032 x 1524
13.8' (4.2m)
9.2' (2.8m)
150
3048 x 2286
20.7' (6.3m)
13.8' (4.2m)
200
4064 x 3048
27.6' (8.4m)
18.4' (5.6m)
300
6096 x 4572
–––––
27.6' (8.4m)
28"
569 x 427
3.6' (1.1m)
–––––
H1
H1 : H2 = 9 : 1
H2