Filter
Top Products
55
Use the Point ▲▼ buttons to enter a number.
Press the Point ◄► buttons to fix the number
and move the red frame pointer to the next
box. The number changes to . If you fixed an
incorrect number, use the Point ◄► buttons
to move the pointer to the number you want to
correct, and then enter the correct number.
Repeat this step to complete entering a four-
digit number.
After entering the four-digit number, move the
pointer to . Press the OK button so that you
can start to operate the projector.
If you entered an incorrect Logo PIN code,
and the number () will
turn red for a moment. Enter the correct Logo
PIN code all over again.
Logo PIN code can be changed to your desired
four-digit number. Press the OK button to
select . Current
dialog box appears, use the Point
▲▼buttons to enter the correct code. The New
Logo PIN code input dialog box appears. Set a
new Logo PIN code, confirmation box appears,
choose to set the new Logo PIN code.
Be sure to note the new Logo PIN code and
keep it on hand. If you lost the number, you
could no longer change the Logo PIN code
setting.
Use the Point ▲▼ buttons to switch On or
, and then press the OK button to make a
choice.
After a correct Logo PIN code
is entered, the following dialog
box appears.
If you forget your Logo PIN code and unable to
change it, the Logo PIN code can be reset to the
factory default setting (4321) according to the
following procedures.
When you reset the Logo PIN code, the PIN code and
Key lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
2. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet
again. Keep holding down the OK button until
the POWER indicator lights. The Logo PIN code
returns to the factory default setting while the Logo
PIN code lock state will remain the same as the
previous set state.