Filter
Top Products
75
Check the indicators for projector condition.
• • • green. • • • red
• • • off
• • • blinks green.
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow.
When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 62,68)
• • • blinks red.
POWER
WARNING
red
LAMP REPLACE
The projector is off. (The AC power cord is
unplugged.)
The projector is in stand-by mode. Press the POWER
button to turn on the projector.
The projector is operating normally.
The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector
cannot be turned on until cooling is completed and
the POWER indicator stops blinking.
The projector is in the Power management mode.
The lamp lights up when operating the projector, and
the projector begins to work.
The temperature inside the projector is abnormally
high. The projector cannot be turned on. When the
projector is cooled down enough and the temperature
returns to normal, the POWER indicator stops
blinking and the projector can be turned on. (The
WARNING indicator keeps blinking.)
The projector has been cooled down enough and
the temperature returns to normal. When turning on
the projector, the WARNING indicator stops blinking.
Please check the Air filter.
The projector detects an abnormal condition and
cannot be turned on. Unplug the AC power cord and
plug it again to turn on the projector. If the projector
is turned off again, unplug the AC power cord and
contact the dealer or the service center for service
and checkup. Do not leave the projector on. It may
cause an electric shock or a fire hazard.
Reaches recommended replacement time.
The icon appearing on the top right corner of the
image indicates the replacement of the lamp.
Please replace the lamp as soon as possible.
The time before the LAMP REPLACE indicator
lighting up, depends on the operating conditions (the
state of the lamp mode).
• • • yellow.