Filter
Top Products
25
as c Ope at o
Basic Operation
Press the NO SHOW button on the remote control unit to black
out the image. To restore to normal, press the NO SHOW button
again or press any other button. When a projected image is
captured and set as “User” in the Logo item in the Setting Menu
(p42), the screen changes each time you press the NO SHOW
button as follows.
The message disappears after 4 seconds.
Press the P-TIMER button on the remote control unit. The timer
display “00 : 00” appears on the screen and the timer starts to
count time (00 : 00 ~ 59 : 59).
To stop the P-Timer, press the P-TIMER button. And then, press
the P-TIMER button again to cancel the P-Timer function.
1
2
Press the MENU button and the On-Screen Menu will
appear. Press the Point
7 8 button to move the red frame
pointer to the Sound Menu icon.
Volume
Press the VOL (+/–) button on the top control or on the remote
control unit to adjust volume. The volume dialog box appears on
the screen for a few seconds.
(+) button to turn up the volume and (–) button to turn down the
volume.
Mute
Press the MUTE button on the remote control unit to cut off
sound. To restore sound to its previous level, press the MUTE
button again or press the VOL (+/–) button.
Press the Point 8 button to turn up the volume, and press the
Point
7 button to turn down the volume.
Press the Point 7 8 button to cut off sound. Dialog box display is
changed to “On” and sound is cut off. To restore sound to its
previous level, press the Point
7 8 button again.
Press the Point
dd
button to move the red frame pointer to
the item that you want to select, and then press the SET
button.
indicates approximate
level of volume.
closes the Sound Menu.
Direct Operation
Volume
Mute
indicates approximate
level of volume.
Press the MUTE button to set
the Mute function On or Off.
The display disappears after 4 seconds.
Sound Menu
Sound Menu icon
Sound Adjustment
Menu Operation
black out ➜ the captured image ➜ normal ➜
• • • • •
P-Timer Function
No Show Function