Filter
Top Products
30
Computer Input
Select the resolution at the Display area dialog box.
Display area
Adjusts the horizontal area displayed by this projector. Press the
Point
7 8 button to decrease/increase value and then press the
SET button.
Display area H
Adjusts the vertical area displayed by this projector. Press the
Point
7 8 button to decrease/increase value and then press the
SET button.
Display area V
With this function on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Full screen
Reset
Store
Exits the PC Adjust Menu.
Quit
To store adjustment data, move the red frame pointer to the Store
icon and then press the SET button. Move the red arrow pointer
to any of Mode 1 to 5 in which you want to store and then press
the SET button.
Resets all adjustment to their previous levels.
Mode free
Vacant Mode
shows values of “Total
dots,” “Horizontal,”
“Vertical,” “Display area
H,” and “Display area V.”
closes this dialog box.
To store adjustment data
To clear adjustment data
To clear adjustment data previously set, move the red frame
pointer to the Mode free icon and then press the SET button.
Move the red arrow pointer to the Mode that you want to clear
and then press the SET button.
Display area
Press the SET button at the
Display area icon and the
Display area dialog box
appears.
✔Note:
Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be selected
when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or “1080i” is selected in the
PC System Menu (p27).
This Mode has parameters being stored.