Canon MP800 All in One Printer User Manual


 
*1: The counter for the on-arrival cleaning is checked at opening and closing of the scanning unit (the first opening and
closing only), before start of printing, at dot-count cleaning (at paper ejection), and at manual cleaning, and the on-
arrival cleaning is performed according to the counter value. After each on-arrival cleaning, the counter value is
reduced by 1.
When the counter value is 3, 2, or 1: On-arrival cleaning is performed.
When the counter value is 0: On-arrival cleaning is not performed.
*2: When 24 to 60 hours have elapsed since the previous Black cleaning, timer cleaning - 0 is performed. However,
this cleaning will be conducted up to 5 times from the printer installation, and no further timer cleaning - 0 will be
performed.
*3: The period of time since the previous cleaning is counted by Black and Color separately. For this reason, the
cleaning mode may differ according to Black or Color.
*4: When only the black ink tank is replaced, Black cleaning is performed. One of the color ink tanks is replaced, Color
cleaning is performed. Both the black and color ink tanks are replaced, All-at-the-same-time cleaning is performed.
(All in sequence)
At ink tank
replacement
*4
(Black/Color/All in
sequence)
When an ink tank is replaced (without the print
head removal or re-installation)
0.38 (Black)
1.06 (Color)
80 (All in
sequence)
40 (Black)
65 (Color)
Manual cleaning
(Black/Color/All at the
same time)
- Via the operation panel (All at the same time
only)
- Via the MP driver (Selectable from Black,
Color, or All at the same time)
0.20 (Black)
0.65 (Color)
45 (All at the same
time)
35 (Black)
40 (Color)
Deep cleaning
(Black/Color/All at the
same time)
Via the MP driver (Selectable from Black,
Color, or All at the same time)
1.95 (Black)
1.06 (Color)
90
(All at the same
time)
45 (Black)
65 (Color)
If the
p
rint head has not
been capped before
power-on
(All in sequence)
0.38 (Black)
1.06 (Color)
80 (All in
sequence)
To the table of contents To the top
<Part 2: 2. CLEANING MODE AND AMOUNT OF INK PURGED>
2-4