Filter
Top Products
Note: - If the Stop/Reset button is pressed 16 or more times, the Alarm LED (orange) or COPY button (green) lights steadily
without any changes.
- At the end of the service mode, press the ON/OFF button. To protect the media sensor from being dislocated during
transportation, the paper lifting plate of the sheet feeder unit will be raised.
<Destination settings procedures>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed
in the table below, and press the ON/OFF button.
1 time Orange (Alarm)
Service test print
See 3-4. Verification Items, (1) Service test print.
2 times Green (COPY) EEPROM information
print
Set a sheet of A4 or letter size paper.
See 3-4. Verification Items, (2) EEPROM
information print.
3 times Orange (Alarm)
EEPROM initialization
The following items are NOT initialized, and the
shipment arrival flag is not on:
- USB serial number
- Destination settings
- Waste ink counter
- CD / DVD correction value
- LF correction value
4 times Green (COPY) Waste ink counter
resetting
5 times Orange (Alarm)
Destination settings
See 3-3. Adjustment / Settings, (8) Service mode,
"Destination settings procedures."
6 times Green (COPY)
Print head deep cleaning (Cleaning of both black and color)
7 times Orange (Alarm)
LF correction
See 3-3. Adjustment / Settings, (8) Service mode,
"LF correction procedures."
8 times Green (COPY) CD / DVD check pattern
print
Not used in servicing
9 times Orange (Alarm) CD / DVD print position
correction (horizontal: X
direction)
Not used in servicing.
10 times Green (COPY) CD / DVD print position
correction (vertical: Y
direction)
Not used in servicing.
11 times Orange (Alarm)
Button and LCD test
See 3-3. Adjustment / Settings, (8) Service mode,
"Button and LCD test procedures"
12 times Green (COPY)
Return to the menu
selection
13 times
Orange (Alarm)
Return to the menu
selection
14 times Green (COPY)
Left margin correction
Not used in servicing.
15 times Orange (Alarm)
Waste ink amount setting
See 3-3. Adjustment / Settings, (8) Service mode,
"Waste ink amount setting procedures"
16 to 21 times Green at even
numbers (COPY)
Orange at odd
numbers (Alarm)
Return to the menu
selection
Time(s) LED indication Destination CD / DVD print
0 times Green (COPY)
No change of the destination
1 time Orange (Alarm)
Japan
Supported
2 times Green (COPY)
Korea
Not supported
1-28
Once in the service mode: Press the On/Off
button 2x after pressing the Stop button 4x.