Filter
Top Products
6 Before Printing
Handling the Original Document
This section describes how to load the original document on the Platen Glass.
Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Loading Original Documents
Load originals to copy or scan on the Platen Glass. For details on how to load a photo, see
“Scanning a Photo” on page 37. For details on how to load a film, see “Scanning a Film” on
page 37.
1 Load the original document on the Platen Glass.
(1) Lift the Document Cover.
(2) Load the original on the Platen Glass.
Place the original face down on the Platen
Glass.
Align the upper left corner of your original
with the alignment mark on the upper left
corner of the Platen Glass.
Document
type
z
Paper documents
z
Photographs
z
Books
z
Films
* For details on positive and negative 35 mm film strips and 35 mm slides,
see “Photo Printing from Photo or Film” on page 37.
Size (W x L) Max. 8.5 x 11.7 inches / 216 x 297 mm
Thickness Max. 0.98 inches / 25 mm
Note
Make sure any glue, ink, correction fluid, or the like on the original document is completely dry
before loading it on the Platen Glass.
(1)
(2)