Canon P-150M Scanner User Manual


 
10
Important Safety Instructions
To ensure the safe operation of this scanner, make sure to read the
safety warnings and precautions described below.
Installation Location
The performance of this scanner is affected by the environment in
which it is installed. Make sure that the location where the scanner is
installed meets the following environmental requirements.
Provide adequate space around the scanner for operation,
maintenance, and ventilation.
Provide adequate space in front of the scanner, as scanned
documents are ejected from the front.
Avoid installing the scanner in direct sunlight. If this is unavoidable,
use curtains to shade the scanner.
Avoid locations with excessive dust. Dust can have negative effects
on the inner parts of the scanner.
Avoid warm or humid locations, such as in the vicinity of a water
faucet, water heater, or humidifier, and avoid locations where the
fumes from ammonia, paint thinner, or other volatile chemicals may
be present.
Avoid locations that are unstable or subject to vibration.
Avoid exposing the scanner to rapid changes in temperature. If the
room in which the scanner is installed is cold but rapidly heated,
water droplets (condensation) may form inside the scanner. This
may result in a noticeable degradation in scanning quality. The
following conditions are recommended for optimal scanning quality:
Room temperature: 59 to 90.5°F (15 to 32.5°C)
Humidity: 25 to 80% (RH)
Avoid installing the scanner near equipment that generates a
magnetic field (e.g., speakers, televisions, or radios).
Moving the Scanner
When moving the scanner, make sure to carry it with both hands so
as not to drop it. The scanner weighs approximately 2.2 lb (1.0 kg).
Make sure to disconnect any USB cables and AC adapters (not
supplied) when moving the scanner. If the scanner is carried with
these items connected, the plugs and connectors may be damaged
or cause the scanner to fall and result in personal injury or damage
to the scanner.
AC Adapter (Not Supplied)
When using an AC adapter (not supplied) to power the unit, make
sure to read the operating manual for the AC adapter.
Use only recommended AC adapters. In addition, do not use these
AC adapters with devices other than the scanner.
Using the AC adapter, you can obtain better scanning speed than
when using the USB cable by itself.
If you have any questions regarding the power supply, contact your
local authorized Canon dealer or service representative for further
information.
Handling
WARNING
Never place alcohol, benzene, paint thinner, or other flammable
substances near the scanner.
4" (100 mm)
4" (100 mm)
4" (100 mm)