Filter
Top Products
118
Projecting Data on USB Flash Memory (SX80 II)
You can connect a USB flash memory to the projector
for direct projection of the images (saved in JPEG for-
mat) saved in the USB flash memory.
• Images saved only in JPEG format are available for
projection.
Connecting an USB Flash Memory
1 Turn the projector power on.
2 Switch the input signal to [USB].
Press the INPUT button, select [USB] with [ ] / [ ] buttons, and press the OK button.
If you switch to [USB] when a USB flash memory is not
connected or the hard disk is not powered on, the screen
as shown in the right appears.
If the projector recognizes a USB flash memory, The "USB
file browser" appears.
USB flash memory
Connectable USB Devices
With this projector, you can connect the USB devices (general USB flash memories
or USB-connected hard disks) that support the mass storage class (serves as an
external hard drive to Windows computers).
Also, you can connect various memory cards via USB memory card readers.
You can also connect a digital camera or digital video camera that supports a USB
mass storage class mode for image projection.
<
<
Remote control Top control