Filter
Top Products
72
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
O Viewing and saving RAW images
You can select from two types of image quality for displaying/saving
RAW images: high image quality with false color reduction processing
and noise reduction function (p.57) used, or high speed without false
color processing and noise reduction function used.
[High quality]
O False color reduction processing is automatically applied, and the
image can be displayed/saved as a false color reduced-high quality
image. Furthermore, you can use the noise reduction function (p.57)
to reduce the luminance noise and chrominance noise.
O Because the effects of the false color reduction processing and noise
reduction function are difficult to see in the [50% view] or [Fit to
window] display of the edit window and edit image window, use
[100% view] or [200% view] to check.
O We recommend that you normally set [High quality] for a balance
between image quality and display speed.
[View images at high speed (moiré reduction off)] of [High quality]
O If you checkmark [View images at high speed (moiré reduction off)],
when the image is displayed in the edit window or the edit image
window, false color reduction processing is not applied.
O As the [View images at high speed (moiré reduction off)] setting is the
same as [High quality] other than for display of the image, the image
undergoes false color reduction processing when it is saved and the
noise reduction function is also available.
[High speed]
O Since false color reduction processing is not applied, the display
speed of a RAW image in the edit window or the edit image window in
the [100% view] or [200% view] enlargement display, and the time it
takes to save a RAW image is less than in [High quality].
O You cannot use the noise reduction function (p.57).
O Depending on the image, it may be displayed/saved with false color
or noise being noticeable.
The display image quality of [High quality] and [High speed] is the same
except when the image is displayed in the [100% view] or [200% view]
enlargement display in the edit window or the edit image window.
O
JPEG image quality
[Remove block noise and mosquito noise]
O You can improve the quality of a JPEG image by reducing the noise
that is likely to occur when RAW images are converted to JPEG
images and saved (p.38, p.81).
This setting is also effective for JPEG images that have been saved
with a different name.
[Display thumbnails at high quality]
O You can have the thumbnails for JPEG images automatically displayed
at high quality. If you checkmark [Display thumbnails at high quality],
all subsequent JPEG image thumbnails imported into DPP will be
displayed at high quality.
The higher the JPEG image’s compression rate, the more noise is
reduced. When the compression rate is low, the effect of noise reduction
is negligible.
O
Default value of output resolution
You can set the resolution for RAW images converted and saved as
JPEG or TIFF images (p.38, p.81).
What is the difference between the [High quality] and [High
speed] displays?
The extent of the improvement in noise reduction
C OPY