Filter
Top Products
– 19 –
Connecting to your Computer
Important!
• Perform the following procedures only after you have installed the software on
your computer.
• Use only the USB cable that comes bundled with the printer.
To Connect to Your Computer
1. Connect the power cord to the AC adaptor.
2. Connect the USB cable to the USB port
of your computer.
Important!
• Be sure you connect directly to the
USB port of the computer. Connect-
ing through a hub or chaining through
another USB device may cause
misoperation.
• The first time you connect the USB
cable, you have to remove the sticker
covering the printer’s USB port.
3. Plug the AC adaptor plug into the print-
er’s AC adapter terminal (1), and then
plug the power cord into a household
power outlet (2).
Important!
• Use only the AC adaptor that comes
bundled with the printer.
• Take care that you do not excessively
bend or twist, or pull on either end of
the power cord (points marked A and
B in the illustration). Take care that the
power cord is not bent excessively at
these points when storing the cord. Any
of the conditions mentioned above can
cause breaks in the wiring of the cord.
1
2
A
B