Filter
Top Products
E-26
Using the Setup Menu
Pressing the [MENU] key while an image is being projected displays the setup menu on the
projected image. The setup menu can be used to configure a variety of different projector
settings. Use the cursor keys to select and configure settings, and the [ENTER] key to register
them.
The menu items that can be set (or displayed) depend on the current input source. In the
following table, the “Input Source” columns indicate whether each item appears ( ) or not ( )
for each input source (R = RGB, C = Component, V = Video, – = No input signal). A triangle
(
) indicates that the item can be set (or displayed), subject to certain conditions.
z For detailed information about settings and how they are configured, see the User’s Guide
(UsersGuide_English.pdf) on the CD-ROM that comes with the projector.
z USB Settings (XJ-S36/XJ-S46 only) are on a setup menu that appears when a USB device is
connected to projector. For details, see “USB Function Guide” on the bundled CD-ROM.
Main menu Input Source
Sub-menu R C V
–
Image Adjustment
Brightness
Contrast
Sharpness
Saturation
Tint
Color Mode
Color Balance
Vertical Position
Horizontal Position
Frequency
Phase
Video Mode
Restore Menu Defaults
Volume Adjustment
Volume
Restore Menu Defaults
Screen Settings
Keystone Correction
Aspect Ratio
Projection Mode
Ceiling Mount
Startup Screen
No Signal Screen
Blank Screen
Restore Menu Defaults
Input Settings
RGB Input
Video Signal
Signal Name Indicator
Special Signal
Restore Menu Defaults
Option Settings 1
Menu Position
Auto Keystone Correction
Auto Adjust
Eco Mode
Auto Power Off
Power On Password
Direct Power On
Language
Restore Menu Defaults
Option Settings 2
Zoom Memory
Pointer
Plug and Play
(XJ-S36/XJ-S46 only)
USB Audio Out
(XJ-S36/XJ-S46 only)
Restore Menu Defaults
USB (XJ-S36/XJ-S46 only)
Operational Info
Lamp Time
Reset Lamp Time
Input Signal
Signal Name
Index
Resolution
Horizontal Frequency
Vertical Frequency
Scan System
Restore All Defaults
Restore All Defaults
Unit Operating Time
Main menu Input Source
Sub-menu R C V
–