Filter
Top Products
E-31
User Maintenance
English
About the Lamp
There are two types of lamp cartridges, Type A (with handle) and Type B (with ribbon) as
shown in the illustration. Note that the handle and the ribbon serve exactly the same function,
so you can perform the following procedures the same way, regardless of whether your lamp
cartridge has a handle or a ribbon. All of the illustrations in this manual show the Type B lamp
cartridge.
z Disposing of the Lamp (U.S.A. Only)
This product utilizes a lamp containing mercury. Disposal of the lamp may be regulated due
to environmental considerations. For disposal or recycling information, please contact your
local authorities or the Electronic Industries Alliance: http://www.eiae.org.
To replace the lamp
z When replacing the lamp, use the special screwdriver that comes with the replacement
lamp. The projector does not come with a screwdriver.
1. Turn off the projector and unplug its AC
power cord.
2. Wait for about 60 minutes to allow the
projector’s current lamp to cool down
completely.
3. Turn over the projector and place it on
top of a desk or on some other stable
surface.
4. Loosen the lamp cover screw, and then
remove the lamp cover.
AB
Lamp cover