Filter
Top Products
12
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
• Image Adjustment J Contrast
• Image Adjustment J Color Mode
• Option Settings 1 J Eco Mode
Note
z Certain settings on the setup menu cannot be changed while there is no input signal
to the projector. Because of this, you should configure setup menu settings after
selecting an input source and starting projection.
z This example covers basic steps only. For more detailed information, see “Setup Menu
Contents” on page 17.
To configure the “Image Adjustment J
JJ
J Contrast” setting
1
Press the [MENU] key to display the setup menu.
2
“Image Adjustment” is initially selected on the main menu, so simply press the
[ENTER] key.
3
Press the [T
TT
T] key once to select “Contrast”.
4
Use the [W
WW
W] (lighter) and [X
XX
X] (darker) keys to adjust contrast.
To configure the “Image Adjustment J
JJ
J Color Mode” setting
5
Press the [T
TT
T] key once to select “Color Mode”.
6
Press the [ENTER] key.
z This displays the color mode menu.
7
Use the [T
TT
T] and [S
SS
S] keys to select the color mode you want.
8
After selecting the color mode you want, press the [ESC] key.