Filter
Top Products
E-24
Confi guring Handheld Terminal Settings
Calibrating Touch Screen Alignment
Whenever the response of the touch screen is poor, or the operations being executed do
not match with the location you are tapping on the touch screen, please recalibrate the
alignment of the touch screen using the following method.
Press the “Fn” key and then press the “4” key after confi rming that “F” is displayed
in the lower right corner of the screen. The following screen is displayed. (Windows
CE models)
You can also display this screen by navigating as follows:
Windows CE models: Start
Settings
Stylus
Calibration
Windows Mobile models: Start
Settings
System
Screen
Align Screen
Press the stylus against the center of the target mark (+ mark) as indicated on the
screen. The screen shown below appears after you press the stylus against the target
at fi ve different locations.
Press the Enter key or tap anywhere on the touch screen. (Windows CE models)
x
x
x
For Windows Mobile models,
the screen is different.
For Windows Mobile models,
the screen is different.
For Windows Mobile models,
the screen is different.
For Windows Mobile models,
the screen is different.