Filter
Top Products
E-35
Handling SIM Cards
The Handheld Terminal supports SIM card.
Since the SIM card slot is located inside the battery pack compartment, fi rst remove the
battery pack when installing or removing a SIM card.
Refer to pages 18 to 20 for information on “Loading and Removing the battery pack”.
Install (or replace) a SIM card according to the procedure described below.
Installing
1. Check that the power is turned off. If the power is on, always make sure to turn it off
by pressing the Power Key.
2. Remove the battery pack.
3. Load the SIM card into the SIM card slot.
As shown in the fi gure, install the card by placing it in the slot with the terminals
facing downwards and then sliding it up under the metal plate until it stops.
Do not push in the card on the angle.
4. Load the battery pack.
x
x