Filter
Top Products
E-33
Handling microSD Cards
The Handheld Terminal supports microSD card.
Since the microSD card slot is located inside the battery pack compartment, fi rst
remove the battery pack when installing or removing a microSD card.
Refer to pages 18 to 20 for information on “Loading and Removing the battery pack”.
Install (or replace) a microSD card according to the procedure described below.
Installing
1. Check that the power is turned off. If the power is on, always make sure to turn it off
by pressing the Power Key.
2. Remove the battery pack.
3. Insert the microSD card with the top of the card (containing lettering) facing up by
properly aligning with the slot.
Although some resistance may be felt when the card is inserted, gently insert the card
all the way into the slot until it contacts the back of the slot.
Do not push in the card on the angle.
4. Load the battery pack.
x
x