Filter
Top Products
28
2.3 HA-A34AT
Table 2.9
Item Specification Remark
No. of LEDs 1
No. of display colors 2 In red and green
Display content Power status (“POWER”)
Indicates the status of terminal being mounted on the charger.
OFF : Power is off.
Flashing in green : Power is on and the terminal is mounted on the charger.
Display Status LED
Flashing in red : Power is on but the terminal is not mounted on the charger.
Input Detection switch for the terminal Push switch
Input voltage DC 12V/24V±5%
DC 12V : Approx. 1,400 mA
Consumption current
DC 24V : Approx. 700 mA
While supplying
power.
Plug EIAJ RC-5320A Class 4 Center: plus
Input from AC
adaptor
Power cord DT-827CAC
Output voltage DC 5V±10%
Output current 2,500 mA (maximum)
Charge method Constant voltage With curb function
on current
Approx. 4.0 hours For HA-A20BAT
Charge time
Approx. 8.0 hours For DT-5025LBAT
Power
Charge/supply
power
Power supply terminals
The illustration of
the power supply
terminals on the left
is viewed at the
front of the charger.
Weight/Dimensions
Table 2.10
Specification Remark
Weight Approx. 840 g When configured with HA-A30CHG.
Dimensions Approx. 111 (W) x 243 (D) x 104 (H) mm When configured with HA-A30CHG.
GND
Power supply
terminals