Filter
Top Products
E-20
2. Press 1(1:Deg), 2(2:Rad), or 3(3:Gra) to select
the setting you want.
•You can also use fc to select a setting and then
press E.
! Fix: All modes
This setting specifies a fixed number of digits to the right
of the decimal place. Calculation results are rounded off
to the specified number of digits before being displayed.
• Changing this setting automatically cancels any previous
settings made for @ Sci and # Norm.
• Specify the number of decimal places by inputting a value
in the range of 0 (round off and then cut fraction part) to
9 (nine decimal places).
1. Use fc to select “Fix”,
and then press E.
2. Input a value from 0 to 9 to specify the number of decimal
places.
Example: 100 ÷ 7 = 14.286 (Fix 3)
= 14.29 (Fix 2)
@ Sci: All modes
This setting specifies the number of significant digits.
Calculation results are rounded off to the specified number
of digits before being displayed.
• Changing this setting automatically cancels any previous
settings made for ! Fix and # Norm.
•You can specify anywhere from 1 significant digit (by
inputting 1) to 10 significant digits (by inputting 0).
1. Use fc to select “Sci”,
and then press E.
2. Input a value from 0 to 9 to specify the number of
significant digits.
Example: 10 ÷ 7 = 1.4286 × 10
0
(Sci 5)
= 1.429 × 10
0
(Sci 4)