Filter
Top Products
43
Using Schedule Alarms
You can set schedule alarms for Schedule Keeper data entries to help you keep
on time for important appointments. Note the following important points when you
are using a schedule alarm.
• The alarm indicator and time are automatically cleared after the alarm time
is reached.
• Schedule alarms can only be set for Schedule Keeper data entries that
include time data. If you set a schedule alarm for a Schedule Keeper entry
with time data and then later clear the time data, the schedule alarm is
also cleared automatically.
To set a schedule alarm when inputting data
1. Enter the Schedule Keeper and input data, using the procedures described
in steps 1 through 7 under “To input Schedule Keeper data’’ on page 42.
2. After inputting the description, press
NEXT (or L).
• You can press the
NEXT (or L) without inputting anything for the descrip-
tion.
3. Input the schedule alarm time. Use the J and H cursor keys to move
between the hour and minutes
setting.
• You can skip this input if you want the schedule alarm time to be the same
as that for the schedule data time.
• Whenever the schedule alarm setting is shown on the display, pressing
DEL clears the alarm time and displays the prompt “ALM TIME?’’ Input the
alarm time using the same procedure described above.
4. After inputting the data, press
SET to store it into memory.
• Note that the schedule alarm
setting is cleared from the display when you
press
SET.
• If you attempt to set a schedule alarm time that is already passed, the
message “ALARM TIME ALREADY PASSED!’’ appears on the display.
Then the data is stored without a schedule alarm.
Using the Schedule Keeper
Schedule alarm
time
Schedule alarm
indicator
Time data