Filter
Top Products
Getting Started
14
E
To install journal paper
Step 1
Turn the mode switch to
REG1 position.
Step 2
Remove the printer cover.
(If the cover is locked, unlock
by using the printer cover key
before this step.)
Step 3
Open the platen arm.
Step 4
Ensuring the paper is being
fed from the bottom of the
roll, lower the roll into the
space behind the printer.
Step 5
Put the leading end of the
paper over the printer.
Step 6
Close the platen arm slowly
until it locks steadily.
Step 7
Slide the leading end of the
paper into the groove on the
spindle of the take-up reel and
wind it onto the reel two or
three turns.
Locking platen
REG2 X1
REG1 Z1
OFF X2/Z2
RF
PGM
Step 8
Place the take-up reel into
place behind the printer,
above the roll paper.
Step 9
Press the j key to take up
any slack in the paper.
During machine
installation, press the j
key after power on.
Complete
Close the printer cover.