Filter
Top Products
10
Establishing a Wireless LAN Connection between the
Projector and a Computer
This section explains how to establish a wireless LAN connection between the projector and a
computer under the projectors initial default “Wireless” settings.
“Wireless” is one of the projector’s built-in applications. It makes it possible to establish a wireless
LAN connection between the projector and a computer, and project the computer’s display contents.
The following shows the operation flow for projecting computer display contents when Wireless is
configured with its initial default settings.
Note
Under initial default settings, the projector performs wireless LAN communication using
WPA-PSK AES security for comparatively secure wireless data communication. Data sent
between the projector and computer is encrypted based on the projector built-in passphrase
and login code.
You can change the security system and the passphrase, if you want. Changing the passphrase
periodically ensures that unauthorized parties cannot hack into your computer or projector.
See “Configuring Security Settings for a Wireless LAN Connection” (page 18) for more
information.
Wireless LAN Connection and Projection Operation
Flow
On the projector, press the [INPUT] key to project the “Wireless” screen.
On the computer, start up Wireless Connection 3.
On the computer, enter the login code.
Establish a wireless LAN connection between the projector and computer, and project the
computer screen contents from the projector.