Filter
Top Products
14
To use a default SSID to connect a computer to the projector
via wireless LAN
1.
Turn on the projector and wait until the POWER/STANDBY indicator is lit green.
2.
Press the [INPUT] key and select “Wireless” as the input source.
This will project the Wireless standby screen.
3.
Turn on your computer and start up Windows.
4.
On the computer, start up Wireless Connection 3.
If your computer is running Windows Vista
or Windows 7, starting up Wireless Connection 3
will cause the “User Account Control” message to appear. When it does, click [Allow].
The Wireless Connection 3 window will appear with the message “Connecting”.
If your computer is running Windows Vista or Windows 7 and the “Set Network Location”
dialog box appears, click [Cancel] to close the dialog box.
A dialog box like the one shown below as soon as Wireless Connection 3 finds a projector to
connect to.
5.
Enter the user name and login code.
The user name you enter here will be displayed as the user name on the projection screen.
You can enter any name up to 20 characters long.
For the login code, enter the four-digit number displayed on the Wireless standby screen.