Filter
Top Products
32
Option Settings 1 Main Menu
Setting Name Input Setting Unit Description
Auto Keystone
Correction
RCVHDWUN
Single Use this sub-menu to turn auto keystone correction on or off.
On*:
Select this option to turn on auto keystone correction.
Off:
Select this option to turn off auto keystone correction.
Auto Adjust
R N
Source
Specific
Use this sub-menu to select whether the projector should detect
the RGB input signal type (resolution, frequency) and adjust the
projection image accordingly (auto adjust).
1*:
Select this option to turn on auto adjust.
2:
Select this option to turn on auto adjust when a 1360 × 768 or
1400 × 1050 signal is not projected correctly.
3:
Select this option to turn on auto adjust when a 1366 × 768
signal is not projected correctly.
Off:
Select this option to turn off auto adjust.
Eco Mode
RCVHDWUN
Single Specifies whether priority should be giving to low-power,
low-noise operation or to light source unit brightness.
Save:
Gives maximum priority to low-power, low-noise operation.
Eco:
Provides low-power, low-noise operation while maintaining light
source unit brightness to some level.
Off:
Gives maximum priority to light source unit brightness.
Auto Power Off
RCVHDWUN
Single Auto Power Off lets you specify the amount of time of projector
operation and input signal inactivity to be allowed before Auto
Power Off is triggered to turn off projector power automatically.
Auto Power Off can be disabled, if you want.
5 min, 10 min*, 15 min, 20 min, 30 min:
Time until Auto Power off is triggered.
Off:
Disables Auto Power Off.
Power On
Password
RCVHDWUN
Single You can configure the projector to require input of a password
before operation is enabled. For details, see “Password Protecting
the Projector” on page 21.
Direct Power
On
RCVHDWUN
Single Use this sub-menu to turn Direct Power On on or off. See “Direct
Power On” on page 20.
On:
Select this option to turn on Direct Power On.
Off*:
Select this option to turn off Direct Power On.