Filter
Top Products
39
POWER : Amber flashing
Red steady
The projector was turned off automatically due to some problem that was
probably caused by external digital noise or some other reason. Confirm
that the POWER/STANDBY indicator is lit red (without flashing). After
checking the POWER/STANDBY indicator, disconnect the power cord
from the projector and wait for all of the projector’s indicators to go out.
Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
TEMP : Red steady
LIGHT : –
Message : –
POWER : Amber flashing
Red steady
The projector was turned off automatically because the light source unit
turned off or did not turn on. After confirming that the POWER/STANDBY
indicator is lit red (without flashing), unplug the power cord. Wait for a
short while and then plug it back in and turn on the projector again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
TEMP : Red flashing
(0.5-second interval)
LIGHT : Red flashing
(0.5-second interval)
Message : –
POWER : Amber flashing
Red steady
Power has turned off automatically due to a projector memory error.
Confirm that the POWER/STANDBY indicator is lit red (without flashing).
After checking the POWER/STANDBY indicator, disconnect the power
cord from the projector and wait for all of the projector’s indicators to go
out. Next, reconnect the power cord and turn projector power back on.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
TEMP : Red flashing
(2-second interval)
LIGHT : Not lit or red flashing
Message : –
POWER : Amber flashing
Red steady
Power has turned off automatically because the light source unit cover is
open. Perform the following steps.
After confirming that the POWER/STANDBY indicator is lit red (without
flashing), disconnect the power cord from the projector.
Check to make sure that the light source unit cover is closed.
Plug the power cord back in and turn the projector back on again.
If the error occurs again when you turn power back on, contact your
retailer or nearest authorized CASIO Service Center.
TEMP : Amber flashing
(1-second interval)
LIGHT : –
Message : –
Indicator/Error Message Description and Required Action