Filter
Top Products
13
You can use the remote controller keys to adjust the volume level of the audio that is output
from the projector’s speaker.
To adjust the volume level
1
On the remote controller, press the [VOLUME] key.
z This causes the [Volume] screen to appear on the projected image.
2
Press the [] key to increase the volume, or the [] key to lower the volume.
3
After the setting is the way you want, press the [ESC] key.
z This causes the [Volume] screen to disappear.
Note
z You also can use the setup menu to adjust the volume level. For details, see
“Volume Adjustment Main Menu” on page 26.
z Pressing the [VOLUME] key will not display the [
Volume] screen if no audio is being
input to the HDMI port during projection of an HDMI signal.
To mute the audio
1
On the remote controller, press the [VOLUME] key.
2
Press the [ENTER] key.
z This stops output from the speaker.
3
To restore the audio, press the [VOLUME] key again.
Turning on the Eco Mode reduces lamp brightness to save power. The projector’s cooling fan
also operates at a slower speed while the Eco Mode is turned on, which results in quieter
operation.
Turn on the Eco Mode when your priority is quieter operation. Turn off the Eco Mode when
your priority is maximum brightness.
To turn the Eco Mode on or off
Press [ECO] to toggle the Eco Mode on and off.
Adjusting the Volume Level
Eco Mode