Filter
Top Products
32
Option Settings 2 Main Menu
Setting
Name
Input
Setting
Unit
Description
Zoom
Memory
RCVHDN Single Use this sub-menu to turn zoom memory on or off. Zoom
memory lets you save the zoom setting when the
projector is turned off, so it can be restored automatically
the next time the projector is turned on.
On*:
Select this option when you want to restore the zoom
setting that was in effect when the projector was last
turned off, whenever it is turned on.
Off:
Select this option when you want the image to be
projected at its maximum size whenever you turn on the
projector.
Pointer RCVHDN Single Use this sub-menu to specify the type of pointer that
appears first when you press the [POINTER] key.
HDMI Audio
Out
RCVHDN Single Specifies whether the input audio signal should be output
from the projector’s built-in speaker or to the line output.
Speaker*:
Outputs the audio signal being input to the HDMI port
from the speaker.
Line:
Outputs the audio signal being input to the HDMI port
from the AV terminal.
High Altitude RCVHDN Single Use this sub-menu to turn the high-altitude fan speed
setting on or off in accordance with the altitude of the
area where you are using the projector.
On:
Select this setting when using the projector in a high
altitude (1,500 to 3,000 meters above sea level) area
where air is thin. This setting increases cooling efficiency.
Off*:
Select this setting at normal altitudes (up to 1,500 meters).
Important!
Do not use this projector at altitudes greater than
3,000 meters above sea level.
Restore
Menu
Defaults
RCVHDN Single This sub-menu returns all of the sub-menu items on the
Option Settings 2 main menu to their initial default
settings.