Filter
Top Products
33
Operational Info Main Menu
Setting
Name
Input
Setting
Unit
Description
Input Signal RCVHDN Source
Specific
This sub-menu item shows the currently selected input
signal (RGB, Component, or VIDEO). “- - - -” is indicated
here when there is no input signal.
Signal Name RCVHD Source
Specific
This sub-menu item shows the signal name of the signal
being input to the projector. For details about signal
names, see “Signal Name” under “Supported Signals” on
page 52.
Resolution RCVH Single This sub-menu item appears only when RGB is the input
signal. It shows the number of vertical pixels of resolution
of the RGB input signal.
Horizontal
Frequency
RCVHD Source
Specific
This sub-menu item shows the horizontal frequency of the
input signal.
Vertical
Frequency
RCVHD Source
Specific
This sub-menu item shows the vertical frequency of the
input signal.
Scan System RCVHD Source
Specific
This sub-menu item appears only when RGB or
component is the input signal, and shows the scanning
frequency of the input signal. The input signal is interlace
or non-interlace for an RGB signal input, and interlace or
progressive for a component signal input.
Lamp Time RCVHDN Single This sub-menu item shows the cumulative number of
hours the current lamp has been used to date. Use this
value as a reference when deciding whether or not the
current lamp needs to be replaced. For details about
replacing the lamp, see “Replacing the Lamp” on page
37.
Reset Lamp
Time
RCVHDN Single Use this sub-menu item to reset the lamp time to 0
hours after replacing the lamp. For details about replacing
the lamp and the lamp time reset operation, see
“Replacing the Lamp” on page 37.